Biomechanical behavior of three maxillary expanders in cleft lip and palate: a finite element study.

This study evaluated the stress distribution in the dentoalveolar and palatal bone structures during maxillary expansion in a 17-year-old male patient with bilateral cleft lip and palate (BCLP) using expanders with dental (HYRAX) and skeletal anchorage (MARPE). For the generation of the specific finite element models, cone-beam computed tomography was used, and the DICOM files were exported to Mimics 3-Matic (Materialise) and Patran (MSC Software) software. Three specific three-dimensional models were generated: A) HYRAX: conventional four-banded hyrax screw (9 mm); B) MARPE-DS: 3 miniscrews (1.8 mm diameter - 5.4 mm length) and four-banded dental anchorage; and C) MARPE-NoDS: 3 miniscrews without dental anchorage. Maxillary expansion was simulated by activating the expanders transversely 1 mm on the "X" axis. HYRAX resulted in higher levels of deformation predominantly in the dentoalveolar region. MARPE-DS showed stress in the dentoalveolar region and mainly in the center of the palatal region, at approximately 4,000 µÎµ. MARPE-NoDS exhibited evident stress only in the palatal region. High stress levels in the root anchoring teeth were observed for HYRAX and MARPE-DS. In contrast, MARPE-NoDS cause stress on the tooth structure. The stress distribution from the expanders used in the BLCP showed asymmetric expansive behavior. During the initial activation phase of expansion, the HYRAX and MARPE-DS models produced similarly high strain at the dentoalveolar structures and upper posterior teeth displacement. The MARPE-NoDS model showed restricted strain on the palate.

Assessment of the correlation between supracrestal gingival tissue dimensions and other periodontal phenotypes components via the digital registration method: a cross­sectional study in a Chinese population.

BACKGROUND: Supracrestal gingival tissue dimensions (SGTDs) has been considered to be an essential element of periodontal phenotype (PP) components. This study aimed to explore the relationship between SGTDs and other PP components by digital superposition method that integrated cone beam computed tomography (CBCT) with intraoral scanning. METHODS: This cross-sectional study was conducted at the Stomatology Hospital of Fujian Medical University. Participants were recruited based on the inclusion and exclusion criteria. The data obtained from the digital scanner (TRIOS 3, 3Shape, Denmark) and CBCT images were imported into the TRIOS software (Implant Studio, 3Shape, Denmark) for computing relevant parameters. The significant level was set at 0.05. RESULTS: A total of 83 participants with 498 maxillary anterior teeth were finally included. The mean values of supracrestal gingival height (SGH) and the distance from the cementoenamel junction (CEJ) to the crest of the alveolar ridge (CEJ-ABC) on the buccal site were significantly higher than palatal SGH (SGH-p) and palatal CEJ-ABC (CEJ-ABC-p). Men exhibited taller CEJ-ABC and SGH-p than women. Additionally, tooth type was significantly associated with the SGH, SGH-p and CEJ-ABC-p. Taller SGH was associated with wider crown, smaller papilla height (PH), flatter gingival margin, thicker bone thickness (BT) and gingival thickness (GT) at CEJ, the alveolar bone crest (ABC), and 2 mm apical to the ABC. Smaller SGH-p displayed thicker BT and GT at CEJ, the ABC, and 2 and 4 mm apical to the ABC. Higher CEJ-ABC showed lower interproximal bone height, smaller PH, flatter gingival margin, thinner GT and BT at CEJ, and 2 mm apical to the ABC. Smaller CEJ-ABC-p displayed thicker BT at CEJ and 2 and 4 mm apical to the ABC. On the buccal, thicker GT was correlated with thicker BT at 2 and 4 mm below the ABC. CONCLUSION: SGTDs exhibited a correlation with other PP components, especially crown shape, gingival margin and interdental PH. The relationship between SGTDs and gingival and bone phenotypes depended on the apico-coronal level evaluated. TRIAL REGISTRATION: This study was approved by the Biomedical Research Ethics Committee of Stomatology Hospital of Fujian Medical University (approval no. 2023-24).

Clinical efficacy of intraoral ultrasonography versus transgingival probing for measurement of gingival thickness in different gingival biotypes: a clinical trial.

BACKGROUND: Transgingival probing is conventionally used for gingival thickness (GT) measurement. However, invasiveness is a major drawback of transgingival probing. Thus, researchers have been in search of alternative methods for measurement of GT. This study compared the clinical efficacy of intraoral ultrasonography and transgingival probing for measurement of GT in different biotypes. MATERIALS AND METHODS: This clinical trial was conducted on 34 patients requiring crown lengthening surgery. GT was measured at 40 points with 2- and 4-mm distances from the free gingival margin (FGM) of anterior and premolar teeth of both jaws in each patient by an intraoral ultrasound probe. For measurement of GT by the transgingival probing method, infiltration anesthesia was induced, and a #25 finger spreader (25 mm) was vertically inserted into the soft tissue until contacting bone. The inserted length was measured by a digital caliper with 0.01 mm accuracy. All measurements were made by an operator with high reliability under the supervision of a radiologist. Data were analyzed by t-test, Power and Effect Size formula, and intraclass correlation coefficient (ICC). RESULTS: The two methods were significantly different in measurement of GT in both thick and thin biotypes at 2- and 4-mm distances (P < 0.001). The two methods had a significant difference in both the mandible (P < 0.001) and maxilla (P < 0.001) and in both the anterior (P < 0.003) and premolar (P < 0.003) regions. Although the difference was statistically significant in t-tests, the power and effect formula proved it to be clinically insignificant. Also, the ICC of the two methods revealed excellent agreement. CONCLUSION: The results showed optimal agreement of ultrasound and transgingival probing for measurement of GT. TRIAL REGISTRATION: The study was approved by the ethics committee of Shahid Beheshti University of Medical Sciences on 2021-12-28 (IR.SBMU.DRC.REC.1400.138) and registered in the Iranian Registry of Clinical Trials on 2022-03-14 (IRCT20211229053566N1).

Correlation Between Acquisition of Dental Implant Stability and Hounsfield Units at Dental Implant Placement.

Alveolar bone quality at the implantation site affects the initial stability of dental implant treatment. However, the relationship between bone quality and osseointegration has yet to be evaluated. Herein, we aimed to investigate the effect of bone quality on dental implant stability in osseointegration formation changes. Patients underwent computed tomography imaging before dental implantation at the posterior. Hounsfield units were measured at the platform, middle, and tip sites. Implant stability was measured using resonance frequency analysis immediately and at 3 months postoperatively, in which the difference in implant stability quotients (ISQ) was defined as the change between primary and secondary fixation. In multiple regression analysis, the dependent variable was the change between the immediate and secondary fixations. We included 81 implants that conformed to the criteria. Primary fixation yielded the following results: R2 = 0.117, F = 2.529, and P = .047. The difference between the maxilla and mandible of the implantation site (P = .02) and the platform-site Hounsfield units (P = .019) were identified as significant factors. The following results were obtained regarding the change between the immediate and secondary fixation: R2 = 0.714, F = 40.964, and P < .001. The difference between diameter (P = .008) and the immediate ISQ (P < .001) were identified as significant factors. Overall, the bone quality of the implantation site affected initial fixation; however, it had limited effect on secondary fixation. Our findings clarified the period where bone quality affects dental implant treatment and is expected to advance dental implant treatment.

Comparison of PAS and adenoids in patients with and without maxillary micrognathia before orthodontic treatment.

OBJECTIVE: Craniofacial anomalies are widely discussed as predisposing factors of breathing disorders. Since many more cofactors exist, this study investigated the association between maxillary micrognathia and morphological changes of posterior airway space and adenoids in these patients. MATERIAL AND METHODS: Cephalometric radiographs of n = 73 patients were used for data acquisition. The patients were divided into two groups according to certain skeletal characteristics: maxillary micrognathia (n = 34, 16 female, 18 male; mean age 10.55 ± 3.03 years; defined by a SNA angle < 79°) and maxillary eugnathia (n = 39, 19 female, 20 male; mean age 10.93 ± 3.26 years; defined by a SNA angle > 79°). The evaluation included established procedures for measurements of the maxilla, posterior airway space and adenoids. Statistics included Kolmogorov-Smirnov-, T- and Mann-Whitney-U-Tests for the radiographs. The level of significance was set at p < 0.05. RESULTS: The cephalometric analysis showed differences in the superior posterior face height and the depth of the posterior airway space at palatal level among the two groups. The depth of the posterior airway space at mandibular level was the same for both groups, just as the size of the area taken by adenoids in the nasopharynx. CONCLUSIONS: Skeletal anomalies affect the dimension of the posterior airway space. There were differences among the subjects with maxillary micrognathia and these with a normal maxilla. However, the maxilla was only assessed in the sagittal direction, not in the transverse. This study showed that the morphology of the maxilla relates to the posterior airway space whereas the adenoids seem not to be affected. CLINICAL RELEVANCE: Maxillary micrognathia is significantly associated with a smaller depth of the posterior airway space at the palatal level compared to patients with maxillary eugnathia.

Site selection of micro-implant anchorages in the infrazygomatic crest in adult orthodontic patients.

OBJECTIVES: To determine the optimal placement of miniscrews, this study compared adult male and female patients in terms of cortical bone density, cortical bone thickness, and available bone width in the infrazygomatic crest region. METHODS: The cone beam computed tomography imaging data of 200 patients (20-30 years old; 100 males and 100 females) were collected. The right maxillary posterior teeth in the sagittal plane were divided into six levels from proximal to distal, and three measurement sites were positioned at vertical distances of 8, 10, and 12 mm from the cementum. Cortical bone density, cortical bone thickness, and available bone width were measured in 18 measurement sites in the infrazygomatic crest and analyzed statistically. RESULTS: The highest cortical bone density, cortical bone thickness, and available bone width in the infrazygomatic crest in adult male and female patients were at the level of the interradicular space between the maxillary second premolar and maxillary first molar. The bone cortical density and thickness increased with vertical height, whereas the available bone width decreased with increasing vertical height. Differences were observed in cortical bone density, cortical bone thickness, and available bone width between adult male and female patients. CONCLUSIONS: The optimal implantation sites of the micro-implant anchorages in the infrazygomatic crest were at the level of the interradicular space between the maxillary second premolar and the maxillary first molar, and the vertical height of the optimal implantation site in males was appropriately higher than that in females.

[Review of clinical effects of disk-up sinus reamer(DSR)-based internal sinus floor elevation with implantation in 10 years].

PURPOSE: To analyze the bone remodeling around the implant 10 years after disk-up sinus reamer(DSR)-based internal sinus floor elevation with implantation and to investigate the influence of different factors on implant retention. METHODS: The clinical and imaging data of patients undergoing DSR-based sinus floor elevation with simultaneous implantation were collected from the Department of Dental Implantology, Affiliated Hospital of Qingdao University from January 2008 to December 2011. Panoramic film and CBCT were used to measure the changes of bone mass around implant in different periods. Kaplan-Meier and Log-rank tests were used to analyze the effects of different factors on implant retention with SPSS 26.0 software package. RESULTS: The study included 98 patients with a total of 128 implants. During the follow-up of 0-168 months, 7 implants failed, and the remaining formed good osseointegration and functioned, with a 10-year cumulative retention rate of 94.53%. The height of bone formation was (0.29±0.15) mm at the top and (2.74±0.66) mm in the sinus of 75 implant sites with complete imaging data obtained ten years after surgery. Kaplan-Meier and Log-rank tests showed that 8 factors including initial bone height, elevated bone height, mucosal perforation, implant length, implant torsion, diabetes, smoking and periodontitis had significant effects on implant retention. CONCLUSIONS: The DSR-based internal sinus floor elevation with implantation is a reliable and stable bone augmentation operation for vertical bone defect in maxillary posterior region, with a 10-year cumulative retention rate of no less than 94%. Initial bone height, elevated bone height, mucosal perforation, implant length, implant torsion, diabetes, smoking and periodontitis are the important factors affecting the long-term retention rate of implants.

Radiological features and treatment of erupting maxillary canines in relation to the occurrence of dental developmental abnormalities.

OBJECTIVE: This study aimed to investigate the radiological features of the permanent canines and the treatment carried out to ensure their eruption relative to certain features involved in Dental Anomaly Patterns (DAP). MATERIAL AND METHODS: The cross-sectional part of this retrospective register--based study focused on 1,315 dental panoramic tomographs (DPTs) of children aged 8.5-10.5 years, while the longitudinal part involved information on the treatment provided for 1,269 canines after the DPTs and on their eruption into the oral cavity. RESULTS: The canines of the DAP children more often showed evidence of early treatment (p = 0.014), with girls having more frequently interceptive treatment (p = 0.004) and boys early headgear (p = 0.022). Delayed dental age was associated with early treatment (OR 3.29, 95% CI 1.08-9.99). Either no or clear overlapping of a canine with the lateral incisor occurred more often in the DAP children, whereas canine inclination did not differ between the groups. The root development stage of the canine was more often either beginning or well advanced in the DAP children. CONCLUSIONS: The children with dental developmental abnormalities more often showed evidence of early treatment for the canines. Monitoring of the erupting canines after the first mixed stage is important to enable timely early treatment.

Immediate single-tooth replacement with acellular dermal matrix allogeneic bone and ossifying collagen scaffold: A case series.

The pursuit of predictable implant success in the aesthetic zone continues as technology develops. Creating stable marginal bone and an optimal peri-implant mucosal environment is the foundation for a long-term healthy and aesthetic implant treatment outcome. Tissue stability is dependent on multiple factors, including the regenerative materials used to create the peri-implant supporting tissues and maintain the tissue volume. The present study aims to describe a technique that combines a flapless approach to extract hopeless teeth in the aesthetic zone and implant insertion using an acellular dermal matrix placed to contain the coronal aspect of an innovative ossifying collagen scaffold designed to promote neoformation of vital native bone. This technique combines a minimally invasive approach with the application of a novel biomaterial that offers stable augmentation of the gingival thickness as well as bone fill in the facial gap, the space between the implant and the buccal plate, to ensure predictable aesthetic results. A collection of cases are presented to demonstrate the surgical technique and the situation over a follow-up period of 22 months. Pre- and post-treatment CBCT imaging were utilised to quantify the stability or changes noted in the alveolar bone, and pre-and post-treatment intraoral scanning were used for the same purpose in the peri-implant phenotype. This case series presents stable and aesthetic clinical outcomes evaluated through digital assessment.

Comprehensive analysis of lateral nasal wall anatomy to optimize the osteotomy in different skeletal patterns.

PURPOSE: Variations in nasal wall anatomy are crucial in patients with dentofacial deformities undergoing Le Fort I osteotomy. These structural variations heighten the potential for complications during surgical procedures. Hence, the study focused on evaluating the differences in the lateral nasal wall anatomy across different skeletal Classes. METHODS: This study evaluated 86 patients aged 18-43 years with different skeletal Classes. In the axial images acquired from coronal sections, two angulations and the linear distances of the lateral nasal wall were measured in Class I, II, and III patients. The measurement between the piriform opening and the most anterior point of the greater palatine foramen was evaluated in three parts regarding the osteotomy line. Differences between the skeletal patterns were analyzed using an independent sample t-test and Mann-Whitney U test with a significance level of 0.05. The intra-class correlation coefficient was calculated for inter-observer and intra-observer agreement. RESULTS: There was a statistically significant difference between Class I and Class II subjects regarding the anterior lateral nasal wall (p = 0.011) and anterior nasal thickness (a) (0.004). There was a significant difference between Class I and Class III patients regarding anterior nasal thickness (a) (p < 0.001) and total lateral nasal wall length (p < 0.001). CONCLUSION: For instance, the measurements of Class III and Class II patients were relatively different from those of the Class I patients. Therefore, preoperative Cone-Beam Computed Tomographic analysis should be performed for each patient prior to Le Fort I osteotomy to ensure that the procedure is performed safely.

Medium-term effects of rapid maxillary expansion on nasal cavity and pharyngeal airway volumes considering age as a factor: A retrospective study.

OBJECTIVES: The medium-term effects of rapid maxillary expansion (RME) on nasal cavity (NC) and upper airway (UA) dimensions based on chronological age are still unclear. This retrospective study evaluated the medium-term changes occurring in the NC and pharyngeal airways (PA) after RME in two distinct age-based cohorts of patients. METHODS: This retrospective study included 48 subjects who underwent RME grouped in two cohorts: a 6-9-year-old group (EEG group: early expansion group - 25 subjects) and an 11-14-year-old group (LEG group: late expansion group - 23 subjects). NC and PA volumes were analyzed from CBCT imaging segmentation before RME (T0) and twelve months after RME (T1). The amount of maxillary expansion (PW) and minimal cross-sectional area (CSmin) were also considered. RESULTS: All PAs' volumetric sub-regions, CSmin and PW showed a significant volumetric increment (p < 0.05). Inter-group comparisons showed significant differences (p < 0.05) for nasopharynx and CSmin parameters (p < 0.05), while no significant changes were recorded for the other UA's sub-regions and PW (p > 0.05). According to a deviation analysis, part of the UA increase (more marked for the nasopharynx area) may have occurred due to reduced adenotonsillar tissues, which were larger in the EEG group. CONCLUSIONS: Twelve months after treatment, clinicians should not expect changes in the UAs dimensions to be solely related to treatment effects of RME; instead, normal craniofacial growth changes and spontaneous regression of the adenotonsillar tissue could represent the most significant factors influencing UAs changes. CLINICAL SIGNIFICANCE: From the clinical perspective, the results of the present study encourage caution when considering the therapeutic effects of RME on airways dimensions.

Influence of alveolar bone thickness and bucco-palatal inclination on root resorption of lateral incisors in unilateral maxillary impacted canines: a retrospective observational study.

BACKGROUND: This study aimed to investigate the potential associations between alveolar bone thickness, bucco-palatal inclination of maxillary lateral incisors, and lateral incisor root resorption in patients with unilateral maxillary impacted canines (UMICs). METHODS: A total of three hundred and five subjects (120 males, 185 females; mean age, 16.39 years; standard deviation, 4.04) with UMICs were included. Canine position and root resorption were assessed using CBCT. UMICs were divided into palatal, buccal and mid-alveolus groups (PICs, BICs and MAICs), with 117, 137 and 51 subjects, respectively. Alveolar bone thickness and bucco-palatal inclination of lateral incisors were measured using the Dolphin software. RESULTS: The prevalence of lateral incisor root resorption was significantly lower in the BICs (13.9%) than MAICs (29.4%) and PICs (29.1%). Alveolar bone thickness of the apical area was smaller in UMICs with lateral incisor root resorption than no resorption in both PICs (8.33 ± 1.64 vs 10.53 ± 2.55 mm) and BICs (8.94 ± 1.85 vs 10.76 ± 2.28 mm). Furthermore, lateral incisors on the impacted side were more buccally inclined in PICs with lateral incisor root resorption than no resorption, while in both BICs and MAICs, there was no statistical difference between lateral incisor root resorption than no resorption. Moreover, alveolar bone thickness of the apical area, rather than bucco-palatal inclination of lateral incisors, was significantly correlated with lateral incisor root resorption both in PICs and BICs. CONCLUSIONS: Lateral incisor root resorption is less common in BICs. Thinner alveolar bone thickness at the apical area of lateral incisors can be considered as a potential risk factor for lateral incisor root resorption in UMICs.

Clinical challenges of biomechanical performance of narrow-diameter implants in maxillary posterior teeth in aging patients: A finite element analysis.

This study evaluated the biomechanical performance of narrow-diameter implant (NDI) treatment in atrophic maxillary posterior teeth in aging patients by finite element analysis. The upper left posterior bone segment with first and second premolar teeth missing obtained from a patient's cone beam computed tomography data was simulated with cortical bone thicknesses of 0.5 and 1.0 mm. Three model groups were analyzed. The Regimen group had NDIs of 3.3 × 10 mm in length with non-splinted crowns. Experimental-1 group had NDIs of 3.0 × 10 mm in length with non-splinted crowns and Experimental-2 group had NDIs of 3.0 × 10 mm in length with splinted crowns. The applied load was 56.9 N in three directions: axial (along the implant axis), oblique at 30° (30° to the bucco-palatal plane compared to the vertical axis of the tooth), and lateral load at 90° (90° in the bucco-palatal plane compared to the vertical axis of the tooth). The results of the von Mises stress on the implant fixture, the elastic strain, and principal value of stress on the crestal marginal bone were analyzed. The axial load direction was comparable in the von Mises stress values in all groups, which indicated it was not necessary to use splinted crowns. The elastic strain values in the axial and oblique directions were within the limits of Frost's mechanostat theory. The principal value of stress in all groups were under the threshold of the compressive stress and tensile strength of cortical bone. In the oblique and lateral directions, the splinted crown showed better results for both the von Mises stress, elastic strain, and principal value of stress than the non-splinted crown. In conclusion, category 2 NDIs can be used in the upper premolar region of aging patients in the case of insufficient bone for category 3 NDI restorations.

Evaluating the Internal Anatomy of Maxillary Premolars in an Adult Saudi Subpopulation Using 2 Classifications: A CBCT-Based Retrospective Study.

BACKGROUND Understanding the root canal morphology is important for successful endodontic treatment. This retrospective cone-beam computed tomography (CBCT) study aimed to compare the adult maxillary premolars (MP), root, and canal morphology among a Saudi Arabian subpopulation based on Vertucci and Ahmed classifications. MATERIAL AND METHODS Scans of 1336 MP - 656 first premolars (MFP) and 680 second premolars (MSP) - were analyzed for the number of roots, morphology of the canals, and symmetry among them. The data were grouped based on the traditional preestablished Vertucci system and newer instantaneous code-based Ahmed classification. Comparative analysis was done using the chi-square test. RESULTS Two roots were common in MFP with 84.4% of the population, followed by those with 1 root and those with 3 roots. In MSP, single roots were more common. The results were non-significant with P values of 0.859 and 0.471, respectively. Most of these MFP had Type IV Vertucci configuration/²TNB¹P¹ Ahmed et al code (TN-tooth number, B-buccal canal, P-palatal canal). In MSP, Type I Vertucci/¹TN¹ Ahmed et al code was most common. However, the results were not statistically significant for the PM with P values of 0.997 and 0.732, respectively. Sex-based difference among them for the roots and root canals was also non-significant. Symmetry among PM in opposite quadrants was 87.1% in MFP and 90% in MSP. CONCLUSIONS Two roots with Type IV (²TNB¹P¹) and 1 root with Type I (¹TN¹) were most common in MFP and MSP, respectively. Symmetry among opposing PM was high.

Dentoskeletal effects of mini-screw assisted, non-surgical palatal expansion in adults using a modified force-controlled polycyclic protocol: a single-centre retrospective study.

OBJECTIVES: This study assessed the dental and skeletal effects of pure bone-borne, non-surgical maxillary expansion, using a modified force-controlled polycyclic protocol. METHODS: Records of 17 adult patients, mean age 24.1 years; range 18-39 years, who had undergone maxillary expansion using a bone-borne Quad-expander (with 4 mini-screws), were analysed. In all patients, 0.17 mm/day of expansion was completed for 1 week, followed by a cyclic protocol of expansion of forward and backward turns until the force needed to turn the expander was below 400 cN, assessed weekly. After this, expansion continued at a rate of 0.17 mm/day until the desired amount of expansion was achieved. Cone beam computer tomography scans were taken pre- and post-expansion. RESULTS: The mid-palatal suture was successfully opened in 100% of patients included in this study. Axially, the amount of skeletal opening at the posterior nasal spine was 61% of the anterior nasal spine. Expansion was pyramidal in the coronal plane. Significant increases at the dental and skeletal levels were achieved, with changes at the skeletal level reaching 73%. The alveolar bone angle increased more than the angular changes at the molars and premolars. LIMITATIONS: This is a retrospective study with short-term results. CONCLUSION: The Quad-expander, with a force-controlled polycyclic expansion protocol, effectively produced a significant increase in maxillary width in skeletally mature subjects in the short term.

OrthoCalc: The six degrees of freedom measurement workflow of rotational and displacement changes for maxilla positioning evaluation.

BACKGROUND: This study is undertaken to establish the accuracy and reliability of OrthoCalc, a 3D application designed for the evaluation of maxillary positioning. METHODS: We registered target virtual planned models, maxillary models from pre-operative and post-operative CT scans, and post-operative intra-oral scans to a common reference system, allowing for digital evaluation. To assess rotational changes, we introduced a novel measurement method based on virtual cuboid models. Displacement errors were calculated based on proposed registration matrices. We also compared OrthoCalc to established commercial medical software as a benchmark. RESULTS: Statistical significance calculated showed no significant differences between OrthoCalc and commercial software. the biggest error of 0.04 degree in rotation change was found in the yaw. A maximum displacement change of 0.75 mm was found in the X direction. CONCLUSIONS: Our study validates OrthoCalc as a precise and reliable tool for assessing maxillary position changes with six degrees of freedom in orthognathic surgery, endorsing its clinical utility.

Diagnostic accuracy of conventional orthodontic radiographic modalities and cone-beam computed tomography for localization of impacted maxillary canine teeth.

BACKGROUND: Orthodontic treatment planning for an impacted canine tooth requires accurate information about its position. The aim of this study was to compare the diagnostic accuracy of two conventional orthodontic radiographic modalities with cone-beam computed tomography (CBCT) for localization of impacted maxillary canine teeth. MATERIALS AND METHODS: Panoramic radiographs, lateral cephalograms, and CBCT scans of 30 patients with unilaterally impacted maxillary canine teeth were retrieved from the archives. Eight expert orthodontists evaluated the parameters related to the location of impacted canine teeth by using panoramic radiographs and lateral cephalograms of patients. After 4 weeks, the same parameters were evaluated on CBCT scans of patients. The diagnostic accuracy of conventional modalities and CBCT was compared with each other and also with the gold standard. RESULTS: The conventional radiographic modalities and CBCT had similar accuracy for assessment of the overall inclination (p = 0.11), apex morphology (p = 0.18), and mesiodistal position of the apex (p = 0.12). CBCT had significantly higher accuracy for determination of incisal tip location (p = 0.001), labiopalatal (p = 0.001) and vertical (p = 0.01) position of the crown tip, minimum bone thickness covering the crown (p = 0.001), and root resorption of the adjacent tooth (p = 0.001). CONCLUSION: The combination of panoramic radiographs and lateral cephalograms was sufficiently accurate to assess some diagnostic parameters such as overall inclination, apex morphology, and mesiodistal apex location of impacted canine teeth.

Performance evaluation of three versions of a convolutional neural network for object detection and segmentation using a multiclass and reduced panoramic radiograph dataset.

OBJECTIVES: To evaluate the diagnostic performance of three versions of a deep-learning convolutional neural network in terms of object detection and segmentation using a multiclass panoramic radiograph dataset. METHODS: A total of 600 orthopantomographies were randomly selected for this study and manually annotated by a single operator using an image annotation tool (COCO Annotator v.11.0.1) to establish ground truth. The annotation classes included teeth, maxilla, mandible, inferior alveolar nerve, dento- and implant-supported crowns/pontics, endodontic treatment, resin-based restorations, metallic restorations, and implants. The dataset was then divided into training, validation, and testing subsets, which were used to train versions 5, 7, and 8 of You Only Look Once (YOLO) Neural Network. Results were stored, and a posterior performance analysis was carried out by calculating the precision (P), recall (R), F1 Score, Intersection over Union (IoU), and mean average precision (mAP) at 0.5 and 0.5-0.95 thresholds. The confusion matrix and recall precision graphs were also sketched. RESULTS: YOLOv5s showed an improvement in object detection results with an average R = 0.634, P = 0.781, mAP0.5 = 0.631, and mAP0.5-0.95 = 0.392. YOLOv7m achieved the best object detection results with average R = 0.793, P = 0.779, mAP0.5 = 0.740, and mAP0.5-0.95 = 0,481. For object segmentation, YOLOv8m obtained the best average results (R = 0.589, P = 0.755, mAP0.5 = 0.591, and mAP0.5-0.95 = 0.272). CONCLUSIONS: YOLOv7m was better suited for object detection, while YOLOv8m demonstrated superior performance in object segmentation. The most frequent error in object detection was related to background classification. Conversely, in object segmentation, there is a tendency to misclassify True Positives across different dental treatment categories. CLINICAL SIGNIFICANCE: General diagnostic and treatment decisions based on panoramic radiographs can be enhanced using new artificial intelligence-based tools. Nevertheless, the reliability of these neural networks should be subjected to training and validation to ensure their generalizability.

Artificial intelligence-based automated preprocessing and classification of impacted maxillary canines in panoramic radiographs.

OBJECTIVES: Automating the digital workflow for diagnosing impacted canines using panoramic radiographs (PRs) is challenging. This study explored feature extraction, automated cropping, and classification of impacted and nonimpacted canines as a first step. METHODS: A convolutional neural network with SqueezeNet architecture was first trained to classify two groups of PRs (91with and 91without impacted canines) on the MATLAB programming platform. Based on results, the need to crop the PRs was realized. Next, artificial intelligence (AI) detectors were trained to identify specific landmarks (maxillary central incisors, lateral incisors, canines, bicuspids, nasal area, and the mandibular ramus) on the PRs. Landmarks were then explored to guide cropping of the PRs. Finally, improvements in classification of automatically cropped PRs were studied. RESULTS: Without cropping, the area under the curve (AUC) of the receiver operating characteristic (ROC) curve for classifying impacted and nonimpacted canine was 84%. Landmark training showed that detectors could correctly identify upper central incisors and the ramus in ∼98% of PRs. The combined use of the mandibular ramus and maxillary central incisors as guides for cropping yielded the best results (∼10% incorrect cropping). When automatically cropped PRs were used, the AUC-ROC improved to 96%. CONCLUSIONS: AI algorithms can be automated to preprocess PRs and improve the identification of impacted canines.

Does the sagittal root position of maxillary anterior teeth affect the decision making on immediate implants in the anterior maxilla? A CBCT-based study.

BACKGROUND: Immediate implant placement in the maxillary esthetic zone is a challenging and demanding task. To achieve favorable results, proper case selection and treatment planning are necessary. Variables like the sagittal root position (SRP) and the labial bone thickness (LBT) of maxillary anterior teeth are of paramount importance for predictable outcomes. OBJECTIVES: The aim of the present study was to evaluate the SRP and LBT of maxillary anterior teeth in the context of immediate implant placement by using cone-beam computed tomography (CBCT) in a sample of the Pakistani population. MATERIAL AND METHODS: A cross-sectional study was conducted using the CBCT scans of patients. The SRP of each tooth (maxillary canine to canine) was evaluated in the sagittal section of a CBCT scan according to the classification by Kan et al. The LBT of each tooth was measured perpendicularly to the long axis of tooth at 3 sites: at the alveolar crest (P1); 2 mm from the alveolar crest (P2); and 4 mm from the alveolar crest (P3). Descriptive statistics were reported for SRP and LBT. The χ2 test was employed to assess any association between the variables. RESULTS: Class I SRP was the most prevalent (n = 196, 81.7%), while Class III was the least frequent (n = 1, 0.4%). The association between the tooth type and SRP was statistically non-significant (p = 0.510). CONCLUSIONS: In the evaluated sample of the Pakistani population, the most frequent type of the SRP of maxillary anterior teeth was Class I, which is most favorable for immediate implant placement. Furthermore, the labial bone in the maxillary esthetic zone was found to be mostly thin - LBT was within the range of 0.5-0.9 mm - which makes immediate implant placement in the anterior maxilla a challenge. The results of the present study could serve as a guide for clinicians in terms of appropriate patient selection for immediate implant placement in the maxillary esthetic zone.